Liteway Illusion Solo Tent - DCF

The ILLUSION SOLO TENT DCF is an ultra lightweight one layer tent for UL hiking and bikepacking adventures.

Low weight perfectly combined with a large internal volume and excellent wind resistance. The tent has a 60 cm long vestibule 60 cm and a single entrance with water-repellent YKK zippers.

The tent is designed for one person.

The area of ​​internal living space is about than 2 square meters.

The Illusion Solo can be Installed with one 130-135cm trekking pole.

Only 6 pegs are required for minimal installation. Pegs and trekking pole are not included in the set. Small packed size and volume.

Seams of the shelter are non-sealed. For seams sealing we recommend sealant based on silicone. Mostly prefer McNett Seam Grip+SIL (earlier known as McNett Silnet Seam Sealer).

SETUP

• Stretch the corners with pegs;
• Install a 130-135 cm trekking pole inside the top and bottom of the tent in the provided pockets. The sharp end of the trekking pole must be closed;
• Install the guy line in the loop with Lineloc at the top of the tent and pull this cord along the zipper entrance with peg;
• Tighten the guy lines for tension and wind stability of the tent;
• To increase the internal living space, install guy lines on additional loops.

Features of the technology - the tarp is glued all main seams. Minimum stitched seams. This means that there is no need for additional sealing of the seams

MATERIAL

1.0 oz Dyneema® Composite Fabric is a patented ultra-lightweight material. It is made from flexible nonwoven laminated composites that are additionally reinforced with Dyneema® fibers. The fabric is highly durable and water resistant.

SETUP

• Stretch the corners with pegs;
• Install a 130-135 cm trekking pole inside the top and bottom of the tent in the provided pockets. The sharp end of the trekking pole must be closed;
• Install the guy line in the loop with Lineloc at the top of the tent and pull this cord along the zipper entrance with peg;
• Tighten the guy lines for tension and wind stability of the tent;
• To increase the internal living space, install guy lines on additional loops.

FEATURES

• One entrance with YKK AquaGuard water repellent zipper;
• 2 ventilation windows;
• Wind resistance design;
• Vestibule 60 cm long
  
• Loops with linelocs for comfortable setup and adjustments with guy lines;
• Strengthening with X-Pac in top of the pyramid;
• Catenary cut;
• UHMW PE guy lines;
• Ultralight weight;
• Small packed size.

SPECIFICATIONS

• Materials: 1.0 oz Dyneema® Composite Fabric, WJ, YKK AQUAGUARD zipper #3, X-Pac.
• Weight: 590g / 645g with guylines and stuff sack.
• Outside dimensions: 276cm x 120cm / height 120-125cm.
• Inner dimensions: 230cm x 88cm / width in the middle 115cm.
• Complete set: ILLUSION SOLO TENT DCF, UHMW PE guy lines, stuff sack.
• We recommend this shelter if you are not more than 185 cm tall.

NOTE. The sharp ends of the trekking poles should always be covered with tips. Or you can put a soft cloth / equipment under the sharp end of the pole. Do not insert the sharp ends of sticks or posts into the top of the shelter. The sharp ends of the trekking poles should always be insulated to avoid breaking the top of the Tent.